How to light the bathroom safely?

How to light the bathroom safely?

tube light


Observe the security rules:

Compliance with safety rules is paramount when it comes to installing a lighting system in the bathroom. The owner must be vigilant from the very purchase of accessories. The products to put in the room must be perfectly sealed to limit the risk of electrocution. The setting up of a suitable switch is mandatory. In addition, the addition of a dedicated circuit breaker for the electrical connections of this part is required.

All installations must comply with standard NF C 15-100. The latter recommends the division of the room into four parts: the one in contact with the water: bathtub cannot accommodate any electrical device. Zone 1 2.5 meters from the ground where low voltage bulbs are allowed. The third will be an area 60 centimeters from the bath or shower. Installations protected from spraying can be mounted. Beyond this limit, any type of lighting may be used provided the system incorporates a splash guard.


Install the appropriate luminaire:


The owner who arranges his shower must install suitable lighting for each compartment of the bathroom. The choice of the device will then be based on the IP - Protection index - of the product. This parameter is calibrated according to the level of security against water and the bodies qualified as solid. This index increases in value as the proportion of moisture rises. To optimize safety in the shower, the electrician must also respect the rules for connecting the luminaire. Some fixtures such as a wall lamp- categorized in class I - will be connected to a grounding socket while others will not. These devices will be provided with double protection. Class devices must have a low voltage adapter.
see more on

Comments

Popular posts from this blog

How to illuminate the entrance to your home?

Outdoor lighting and outdoor lighting: instructions for use

The basic rules to perfect your open space